If you made the decision to print your business cards during a workshop , you’ll likely wish to get some recommendations on the way to prepare the right design, and which format to use to satisfy the workshop requirements. Below you’ll find these requirements and tips.When you design your card, confirm that artwork and text are positioned a minimum of 1/8 inch faraway from the sides of the cardboard . Otherwise a neighborhood of your text or logo may get trimmed when cards are cut.
Most printing companies require the first artwork file to incorporate bleeds. Bleed may be a border surrounding the cardboard which can be trimmed off during the cutting process. So, once you export your design to PDF in Swift Publisher, set the 1/8″ (0.125 in) bleed round the edges of the cardboard — click the choices button within the Export dialog. Note, that bleed size requirements could also be different in each specific workshop .Backgrounds and Borders
If you employ a custom background or border in your card, it must re-evaluate the sides of the cardboard slightly, otherwise clear area might result on the sides of the printed card. it isn’t necessary if you’re using one among the backgrounds that accompany Swift Publisher, because the program will add the required bleed when the file is saved to PDF.You may want to use photos and pictures obtained from a camera , scanner or from the web . For images, resolution is crucial permanently quality of the printed picture. an image that appears alright on the screen, may have jagged edges and appear fuzzy when printed. So your image must be at a resolution of a minimum of 300 dpi. to see whether your image has enough resolution, concentrate on your document until 600%. If the image looks acceptable, it’ll look fine when printed. Business Cards printing
If you continue to decided to use a low-resolution image, resize it in Swift Publisher to form it smaller — the print output quality will increaseWhen you design your card, the colours you see on the screen are made from the subsequent three color components: red, green and blue (such colour scheme is understood as RGB). The monitor mixes these three colors to supply other colors. However, printers and other polygraphic equipment use another set of color components: Cyan (blue), Magenta (red), Yellow and Black (this scheme is named “CMYK”). Consider this when designing your card — avoid using too bright colors, because the colours on paper might not always match those you see on the screen.Preparing Your Materials for a printing concern
File Formats Supported by Printing Companies
Before you carry / upload your card design to a printing concern , determine their file format preference. most print shops accept materials within the PDF and TIFF formats. Swift Publisher allows you to save lots of your card in both these formats, with the specified quality (the standard for top quality printing is 600 dpi resolution).When you export your card to PDF, all fonts are embedded automatically. Nevertheless, they’ll sometimes display incorrectly within the workshop (depending on the software and equipment they use). If you would like to insure yourself against such problem, save your card to the TIFF format. the standard will remain an equivalent , and therefore the text will look exactly as you would like it to. Even better if you bring the fabric in both PDF and TIFF formats, and let the printing concern choose which one works best for them.